Union Community Virdi 4000 User Manual

Also see for Virdi 4000: User guide

Union Community Virdi 4000 User Manual Manual pdf 44 page image

VIRDI 4000 TM User’s Manual 44UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/engusing this function, an administrator can read a card number when it is placedon the terminal mounted card reader. This is to register the placed card with theserver. When this LCD screen pops up and an administrator places a card onthe terminal, the card number shows in the LCD screen.To exit from this setting, press [#] to move to the upper menu.3.7.3. Fire Sensing Link◆ [*] [5] ◆[3][0/1=NO/2=NC]:0Default setting: ‘0’Linking a Fire Sensor with the terminal. On sensing a fire, send a fire-sensingsignal to switch the door to open.After setting, press [Enter] to upper menu.3.8. Device settingsIn the main menu, press [6] to select “6. Device”, and the following screen,asking for a password, appears:In most cases there is no need to modify the device settings after installation.Therefore, be careful not to modify the device settings without any obviousreasons.PW:This previously factory set password is to calladministrator’s attention, and is fixed and shouldnot be changed.Input ‘084265’ as the previously set password and press [ENTER] to show thedetailed setting items.3.8.1. Function key settings◆ [*] [6] ‘084265’ [ENTER] ◆[1]1=F1:0 2=F2:03=F3:0 4=F4:05=Ent:O 6=FP:ODefault setting: all ‘O’