Union Community Virdi 4000 User Manual

Also see for Virdi 4000: User guide

Union Community Virdi 4000 User Manual Manual pdf 45 page image

VIRDI 4000 TM User’s Manual 45UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr/engThis is to enable or disable the function keys. ‘O’ means enabling the functionkey and ‘X’ means disabling the function key. Whenever the number conformingto a function key in this setting is pressed, the setting is changed from ‘O’ to ‘X’.In this setting, 1 is for [F1], 2 is for [F2], 3 is for [F3] and 4 is for [F4]. Forexample, if an administrator presses [1] once in this setting the [F1] key isdisabled - [X], a user cannot enter into start mode by pressing the [F1] keybutton as the [F1] key is now disabled.Additionally, if only [F1] or [F2] is set to ‘O’, the terminal can be used in eitheralways start or always leave mode.6 is used for setting detection function for fake fingerprints.After the setting is complete, press [ENTER] to move to the upper menu.3.8.2. Card reader settings3.8.2.1. Card reader type setting◆ [*] [6] ‘084265’ [ENTER] ◆[2]Card Reader:00=Non 1=RF 2=SC3=Wiegand 4=SC15=ExtDefault setting: ‘0’This is to set the card reader mounted in a terminal. Refer to the followings forcorrect setting:- ‘0’: No card reader- ‘1’: Low-frequency RF Card reader mounted- ‘2’: High-frequency smart card reader- ‘3’: Wiegand card reader, such as HID card module- ‘4’: Other smart RF reader- ‘5’: External card readerIf a card reader is mounted within a terminal and the above setting is correctlydone, when [F1]~[F4] or [ENTER] is pressed, the authentication mode ischanged and 1:1 fingerprint authentication is ready for operation - in this case,1:N fingerprint authentication is not performed except for the auto sensingsetting.After the setting is complete, press [ENTER] to move to the upper menu.