5.DISPLAY SETTINGS58Digital tare subtraction (expansion)Using this function, the user can inhibit two tare subtraction related actions whiletare subtraction is enabled: modification of tare set value and ON/OFF togglingof Digital tare subtraction.Select “1” in the relevant bit in the following register to inhibit these two actionswhile tare subtraction is enabled.5-13. Sign Reversal during Discharge ControlWhen measuring weight of raw material tank from which a fixed quantity ofmaterial is drawn (Discharge weighing), Net weight will increase in negativedirection. Using this sign reversing function, the user can obtain Net weight as apositive value.To reverse the sign of Net weight output, select “1” in the relevant bit in thefollowing register.10 0 10 0 100 10 0Undefinedm+31Digital tare subtraction (expansion)Range of tare subtractionTare value read1：inhibit0：don’t care1：0 < Tare < Capacity0：Unrestricted1：Only while reading is stable0：Always10 0 10 0 100 10 0Sign convention for discharge controlm+281：Sign of Net weight not reversed0：Sign of Net weight reversedComplete signal output modeUpper/Lower limit comparison modeOver/Under comparison mode
