Enter SetupCustom SuffixEnable/Disable Custom SuffixIf custom suffix is enabled, you are allowed to append to the data a user-defined suffix that cannot exceed 10 characters.Enable Custom Suffix ** Disable Custom SuffixSet Custom SuffixTo set a custom suffix, scan the Set Custom Suffix barcode and then the numeric barcodes corresponding to thehexadecimal value of a desired suffix. To save the settings, scan the Save barcode.Note: A custom suffix cannot exceed 10 characters.Set Custom SuffixExample: Set the custom suffix to “CODE”1. Check the hex values of “CODE” in the ASCII Table. (“CODE”: 43, 4F, 44, 45)2. Scan the Enter Setup barcode.3. Scan the Set Custom Suffix barcode.4. Scan the numeric barcodes “4”, “3”, “4”, “F”, “4”, “4”, “4” and “5”.5. Scan the Save barcode.6. Scan the Exit Setup barcode.** Exit Setup 38
