Enter SetupParity CheckA check digit is optional for Interleaved 2 o 5 and can be added as the last digit. It is a calculated value used to verify theaccuracy of the data.No Parity Check: The engine transmits Interleaved 2 of 5 barcodes as is.Do Not Transmit Check Digit After Parity Check: The engine will run a parity check using the last digit of Interleaved 2of 5 barcode as check digit. Barcodes passing the check will be transmitted except the last digit, whereas those failing itwill not be transmitted.Transmit Check Digit After Parity Check: The engine will run a parity check using the last digit of Interleaved 2 of 5barcode as check digit. Barcodes passing the check will be transmitted, whereas those failing it will not be transmitted.** No Parity CheckDo Not Transmit Check Digit After Parity Check Transmit Check Digit After Parity CheckNote: If the Do Not Transmit Check Digit After Parity Check option is enabled, Interleaved 2 of 5 barcodes with a lengththat is less than the configured minimum length after having the check digit excluded will not be decoded. (For example,when the Do Not Transmit Check Digit After Parity Check option is enabled and the minimum length is set to 4,Interleaved 2 of 5 barcodes with a total length of 4 characters including the check digit cannot be read.)57 **Exit Setup
