VDO CONTISYS OBD - V3.0 Instruction Manual

Also see for CONTISYS OBD -: Brochure Manual Quick reference guide Quick reference guide Instruction manual

Appendix D: Manual service reset122MercedesMercedes (1998 - 2007)With the Flexible Service System and multi-function steering wheel controls1. Switch ignition ON.2. Use buttons and to scroll through the multi-function display untilthe trip odometer and main odometer readings are displayed, or in the case of aseparate main odometer display, scroll until the exterior temperature is displayed.3. Use buttons and to scroll through the multifunctiondisplay until the service indicator or is displayed.4. Press and hold button on the instrument cluster for approximately 3 seconds,until the following question is displayed within the multifunction display:DO YOU WANT TO RESET SERVICE INTERVAL? CONFIRM BY PRESSING RorSERVICE INTERVAL? RESET WITH R BUTTON FOR 3 SEC5. Press and hold button on the instrument cluster again, until a signal sounds.6. The new service interval will appear in the multifunction display.Note: The refers to the trip distance reset button.Mercedes (1998 - 2002)With the Flexible Service System and without multi-function steering wheelcontrols1. Turn the ignition switch to the ON position and then immediately press the buttonnext to the digital display twice within one second.The current status for days or distance will be displayed.2. Turn the ignition switch to the OFF position within 10 seconds.3. Press and hold the button while turning the ignition switch to the ON position. Thestatus for days or distance will be displayed again.4. After approximately 10 seconds you will hear a confirmation chime and thedisplay will show 10,000 miles (15,000 km). Release the button.