VDO CONTISYS OBD - V3.0 Instruction Manual

Also see for CONTISYS OBD -: Brochure Manual Quick reference guide Quick reference guide Instruction manual

FastCheck56BMW/MINI vehiclesNote: To switch the ignition ON for vehicles fitted with a start/stop button, insert theremote key-fob fully into the ignition slot then press the start/stop button once (withoutany foot pedals depressed).Use the and keys to select the required menu option and press to confirmthe selection. To return to a previous menu, press the key.The screen will display the message “BMW Reset” to confirm the reset process wascompleted successfully.Select Condition Based Service (CBS):Note: All required work must be carried out before service indicators are reset. Failureto do so may result in incorrect service values and cause DTCs to be stored by therelevant control module.Note: The DSC module will not recognise the replacement of the brake pads beforea brake pad wear indicator change has taken place. As such the DSC module will notallow reset of the brake pad service items.It is recommended that the brake pads are replaced with OE equivalent parts. TheDSC module may not recognise a terminal change if using non-genuine brake pads.Select CBS for vehicles only fitted with a J1962 16 pin connector and support CBS.Applicable vehicles:• BMW 1 series (E81/E87)• BMW 3 series (E90/E91/E92/E93)• BMW 5 series (E60/E61)• BMW 6 series (E63/E64)• BMW 7 series (E65)• BMW X5 (E70)• BMW X6 (E71)• MINI (R55/R56/R57)Note: Refer to the ‘Vehicle Application List’ to determine the correct cable.CBS is a system in which the vehicle calculates and monitors the status of servicedcomponents and fluid levels as well as time and mileage based services.Manufacturer Option 1 Option 2BMW CBS Service optionsDigital reset Oil resetDistance resetTime resetAnalogue reset OilInspection service