VDO CONTISYS OBD - V3.0 Instruction Manual

Also see for CONTISYS OBD -: Brochure Manual Quick reference guide Quick reference guide Instruction manual

FastCheck47Volvo - Electronic Parking Brake (EPB) SystemVolvo S80 (2007 -), V70 (2008 -), XC60 (2009-), XC70 (2008 -)There are three options in the PBM/EPB function menu which can be used to accessvarious functions:There are three functions available under the ‘Service Brakes’ menu option:Enter Service ModeThis function is used to put the system into a state that enables work to be carried outby the technician. The Control Module puts the callipers into a state where normaloperation is inhibited and the callipers cannot be closed by any means. This functionmust be used if replacement of the brakes, discs or brake pads is carried out.Pre-Test conditions:• The vehicle must be stationary• The vehicle must be on level ground• The vehicle must be secured with wheel locks.This function takes 30 seconds to complete.Note: After this function has been performed the EPB callipers cannot be closed andare inhibited until exit service mode is run. Cycling the ignition, disconnecting thebattery or diagnostics tester does not exit maintenance mode.Ensure the on screen instructions on the service tool are followed precisely and in thecorrect order.Exit Service ModeThis function is used to put the system back into an operational state after work hasbeen carried out by the technician. Callipers are closed to the applied position, andnormal operation is available again.Pre-Test conditions:• The vehicle must be stationary• The vehicle must be on level ground• The vehicle must be secured with wheel locks.This function takes 10 seconds to complete.Ensure the on screen instructions on the service tool are followed precisely and in thecorrect order.Installation CheckThis function is used to check the operation of the parking brake system after anywork has been completed on the system.Pre-Test conditions:• The vehicle must be stationary• The vehicle must be on level ground