V2.5.6 TEMPERATURE INPUT 6 (ID 71)This monitoring value shows the measured value of the temperature.The unit of the monitoring value is celsius degrees or fahrenheit degrees, depending on the'C/F Selection' parameter value.9.5 EXTRAS AND ADVANCEDV2.6.1 DRIVE STATUS WORD (ID 43)This monitoring value shows the bit-coded status of drive.V2.6.2 READY STATUS (ID 78)This monitoring value shows the bit-coded data about the Ready criteria of the drive.This data is useful for monitoring when the drive is not in the Ready state.NOTE!The values are visible as checkboxes on the graphical display. If a box is selected,the value is active.V2.6.3 APPLICATION STATUS WORD 1 (ID 89)This monitoring value shows the bit-coded statuses of the application.NOTE!The values are visible as checkboxes on the graphical display. If a box is selected,the value is active.V2.6.4 APPLICATION STATUS WORD 2 (ID 90)This monitoring value shows the bit-coded statuses of the application.NOTE!The values are visible as checkboxes on the graphical display. If a box is selected,the value is active.V2.6.5 DIN STATUS WORD 1 (ID 56)This monitoring value shows the bit-coded status of the digital input signals.The monitoring value is a 16 bit word, where each bit shows the status of 1 digital input.From each slot, 6 digital inputs are read. Word 1 starts from the input 1 in slot A (bit0) andends with input 4 in slot C (bit15).V2.6.6 DIN STATUS WORD 2 (ID 57)This monitoring value shows the bit-coded status of the digital input signals.MONITORING VALUE DESCRIPTIONS VACON · 187LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/ 9