Selectionnumber Selection name Description0 No Action AI Low Protection is not used.1 Alarm2 Alarm, preset frequency The frequency reference is set as in P3.9.1.13 Preset AlarmFrequency.3 Alarm, previous frequency The last valid frequency is kept as frequency reference.4 Fault The drive stops as is set in P3.2.5 Stop Mode.5 Fault, coasting The drive stops by coasting.10.10.8 USER-DEFINED FAULT 1P3.9.9.1 USER DEFINED FAULT 1 (ID 15523)Use this parameter to set the digital input signal that activates User Defined Fault 1 (Fault ID1114).P3.9.9.2 RESPONSE TO USER DEFINED FAULT 1 (ID 15525)Use this parameter to select the response of the drive to User Defined Fault 1 (Fault ID1114).10.10.9 USER-DEFINED FAULT 2P3.9.10.1 USER DEFINED FAULT 2 (ID 15524)Use this parameter to set the digital input signal that activates User Defined Fault 2 (Fault ID1115).P3.9.10.2 RESPONSE TO USER DEFINED FAULT 2 (ID 15526)Use this parameter to select the response of the drive to User Defined Fault 2 (Fault ID1115).10.11 AUTOMATIC RESETP3.10.1 AUTOMATIC RESET (ID 731)Use this parameter to enable the Automatic reset function.To select the faults that are reset automatically, enter the value 0 or 1 to parameters fromP3.10.6 to P3.10.13.NOTE!The automatic reset function is available only for some fault types.PARAMETER DESCRIPTIONS VACON · 285LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/ 10
