Vacon 20 CP/X Applications Manual

Also see for 20 CP/X: Applications manual Applications manual

Contents

Vacon 20 CP/X Applications Manual Manual pdf 16 page image

vacon • 13 Description of Groups22.2 Monitor group: menu MONVACON ® 20 CP/X AC drive provides you with a possibility to monitor the actual values of pa-rameters and signals as well as statuses and measurements. See Table in which the basicmonitoring values are presented.Code Monitoring value Unit ID DescriptionV1.1 Output frequency Hz 1 Output frequency to motorV1.2 Frequency reference Hz 25 Frequency reference to motor controlV1.3 Motor shaft speed rpm 2 Motor speed in rpmV1.4 Motor Current A 3V1.5 Motor Torque % 4 Calculated shaft torqueV1.6 Motor Power % 5 Total power consumption of AC driveV1.7 Motor Voltage V 6V1.8 Motor temperature % 9 Calculated motor temperatureV1.9 DC-link Voltage V 7V1.10 Unit temperature °C 8 Heatsink temperatureV1.11 Board temperature °C 1825 Power board temperatureV1.12 Analogue input 1 % 13 Analogue input AI1V1.13 Analogue input 2 % 14 Analogue input AI2V1.14 Exp. Analogue input % 1837 Analogue input on OPTB4V1.15 Analogue output % 26 Analogue outputV1.16 Exp. Analogue out 1 % 1838 Analogue output 1 on OPTB4-BFV1.17 Exp. Analogue out 2 % 1839 Analogue output 2 on OPTB4V1.18 DI1, DI2, DI3 15 Digital inputs statusV1.19 DI4, DI5, DI6 16 Digital inputs statusV1.20 DI7, DI8, DI9 1835 Digital inputs on OPTB1 statusV1.21 DI10, DI11, DI12 1836 Digital inputs on OPTB1 statusV1.22 RO1, RO2, DO 17 Digital outputs statusV1.23 EO1, EO2, EO3, EO4 1852 Expansion board digital outputs statusV1.24 Process variable 29 Scaled process variable. See P7.10V1.25 PID setpoint % 20 PID controller setpointV1.26 PID error value % 22 PID controller errorV1.27 PID feedback % 21 PID controller actual valueV1.28 PID output % 23 PID controller outputV1.29 Temperature sensor 1 °C or °K 1860 OPTBH sensor 1V1.30 Temperature sensor 2 °C or °K 1861 OPTBH sensor 2V1.31 Temperature sensor 3 °C or °K 1862 OPTBH sensor 3V1.32 ASi board state 1894 OPTBK stateTable 3: Monitoring menu items.NOTE!Values V1.25-28 are hidden when PID output is not used as frequency reference.Values V1.14, V1.17 are hidden when OPTB4 expansion board is not installed.Value V1.16 is hidden when OPTB4-BF expansion board is not installed.Values V1.20, V1.21 are hidden when no expansion board with available inputs is installed. ValueV1.23 is hidden when no expansion board with available outputs is installed.Values V1.29, V1.30, V1.31 are hidden when OPTBH expansion board is not installed.Value V1.32 is hidden when OPTBK expansion board is not installed.