Control Keypad vacon • 7524-hour support +358 (0)201 212 575 • Email: vacon@vacon.com66.3 Navigation on the control keypadThe data on the control keypad is arranged in menus and submenus. The menus are used for thedisplay and editing of measurement and control signals, parameter settings (see Chapter 6.3.2) andreference value and fault displays (see Chapter 6.3.4). Through the menus, you can also adjust thecontrast of the display (see Chapter 6.3.8.5).The first menu level consists of menus M1 to M7 and is called theMain menu. The user can navigatein the Main menu with theBrowser buttons up and down. The desired submenu can be enteredfrom the Main menu with theMenu buttons. When there still are pages to enter under the currentlydisplayed menu or page, you can see an arrow ( ) in the lower right corner of the display and canreach the next menu level by pressingMenu button right.The control keypad navigation chart is shown on the next page. Please note that menu M1 is locatedin the lower left corner. From there you will be able to navigate your way up to the desired menuusing the menu and browser buttons.You will find more detailed descriptions of the menus later in this chapter.LocationDescriptionNumber of itemsavailableV1V14READYLocalRUNMonitor11206.emf