Vacon NX Active Front End User Manual

Contents

Control Keypad vacon • 7724-hour support +358 (0)201 212 575 • Email: vacon@vacon.com6Figure 55. Monitoring menu6.3.2 Parameter menu (M2)Parameters are the way of conveying the commands of the user to Vacon ® NX Active Front End.Parameter values can be edited by entering the Parameter Menu from the Main Menu when thelocation indication M2 is visible on the first line of the display. The value editing procedure ispresented in Figure 56.PressingMenu button right once takes you to the Parameter Group Menu (G#). Locate the desiredparameter group by using theBrowser buttons and pressMenu button right again to see the groupand it‘s parameters. Use theBrowser buttons to find the parameter (P#) you want to edit. PressingMenu button right takes you to the edit mode. As a sign of this, the parameter value starts to blink.You can now change the value in two different ways:Table 25. Monitored signalsCode Signal name Unit DescriptionV1.1 Frequency reference HzV1.2 DC-link voltage V Measured DC-link voltageV1.3 Unit temperature ºC Heat sink temperatureV1.4 Voltage input V AI1V1.5 Current input mA AI2V1.6 DIN1, DIN2, DIN3 Digital input statusesV1.7 DIN4, DIN5, DIN6 Digital input statusesV1.8 DO1, RO1, RO2 Digital and relay output statusesV1.9 Analogue output current mA AO1M1.17 Multimonitoring items Displays three selectable monitoring values. SeeChapter 6.3.8.4, Multimonitoring items (P6.5.4).V1V14READYLocal13.95 HzREADYLocal13.95 HzR EADYLo ca lRUN RUNRUNMonitor Output frequencyFreqReference11204.emf