Vacon NX series Applications Manual
Also see for NX series: User manualUser manualApplications manualMaintenance manualOperating guide
                                                                                                                                                                                                                                                                                                                                                                                                        | |
Contents
| 
7.2 CONTROL I/O1623451819201271389101415162122231117242526Fault+-AO1-(GND)DO1+24 VGNDGNDDIN1DIN2DIN3DIN4DIN5DIN6R O1R O1R O1CMACMBR O2R O2R O2OPTA1OPTA2Terminal Signal Description+10V refAI1+AI1-AI2+AI2-+24VReference outputI/O GroundAnalogue input 2Current range 0—20 mAProgrammable (P2.2.1.9)Control voltage outputI/O groundPlace A: Start/StopProgrammable (G2.2.6)Interlock 1Programmable (G2.2.6)Interlock 2Programmable (G2.2.6)Place B: Start/StopProgrammable (G2.2.6)Jogging speed selectionProgrammable (G2.2.6)Control place A/B selectionProgrammable (G2.2.6)Common for DIN 1—DIN 3Common for DIN4—DIN6Control voltage outputI/O groundAnalogue output 1Output frequencyProgrammable (P2.3.3.2)Digital outputREADYProgrammable (G2.3.1)Open collector,I≤50 mA, U≤48 VDCRelay output 1Aux/Autochange 1Programmable(G2.3.1)Relay output 2Aux/Autochange 2Programmable(G2.3.1)**)Range 0—20 mA/RL,max. 500 ΩAO1+Analogue input 1 PID referencefrom I/ODefault reference from keypad P3.4Ground for reference andcontrolsAnalogue input 2 PIDactual value 1Start signal for control place APID Controller.Contact closed = Interlock usedContact open = Interlock not usedContact closed = Interlock usedContact open = Interlock not usedContact open = Control place A isactive Contact closed = Controlplace B is activeContact closed = Jogging speedactiveContact closed = StartVoltage for potentiometer, etc.Analogue input 1Voltage range 0—10V DCVoltage for switches,etc. max 0.1 AVoltage for switches (see #6)Ground for reference and controlsConnect to GND or +24 VConnect to GND or +24 VGround for reference and controls*)*)2 wireTransmitterReference potentiometer,1-10kΩActualvalue(0) 4-20mAFig. 19: Pump and fan control application default I/O configuration and connection example (with2-wire transmitter)PUMP AND FAN CONTROL APPLICATION VACON · 19724-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM 7 |
Related manuals for Vacon NX series
Vacon NX Series Applications Manual
Vacon NX Series Applications Manual
Vacon 20 SERIES Applications Manual
Vacon 100X series Applications Manual
Vacon 100 Applications Manual
Vacon 100 hvac Applications Manual
Vacon 100 hvac Applications Manual
Vacon 20 CP/X Applications Manual
Vacon 100 flow Applications Manual
Vacon 100 flow Applications Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine