Valor Fires 961 Homeflame Dream Installation And Owner's Manual

Contents

Valor Fires 961 Homeflame Dream Installation And Owner's Manual Manual pdf 38 page image

INSTALLER GUIDEPage 3816. SERVICING & PARTS REPLACEMENT Always turn off the gas supply before commencing any servicing and allowto cool completely. (The appliance inlet ‘T’ connector incorporates anisolating valve). It is recommended that, at least once a year, the appliance is disconnectedand the fireplace opening checked and cleared of any debris. This product uses fuel effect pieces and burner compartment wallscontaining Refractory Ceramic Fibres (RCF), which are man-made vitreoussilicate fibres. Excessive exposure to these materials may cause irritation toeyes, skin and respiratory tract. Consequently, it is important to take carewhen handling these articles to ensure that the release of dust is kept to aminimum. To ensure that the release of fibres from these RCF articles is keptto a minimum, during installation and servicing we recommend that you usea HEPA filtered vacuum to remove any dust and soot accumulated in andaround the fire before and after working on the fire. When replacing thesearticles we recommend that the replaced items are not broken up, but aresealed within a heavy duty polythene bag, clearly labelled as RCF waste. RCFwaste is classed as a stable, non-reactive hazardous waste and may bedisposed at a landfill licensed to accept such waste. Protective clothing isnot required when handling these articles, but we recommend you follow thenormal hygiene rules of not smoking, eating or drinking in the work area andalways wash your hands before eating or drinking. Check that the appliance is clean and that soot or debris is not blocking the gapsbetween the ceramic fuel effect pieces causing an imperfect flame. Check that soot or debris is not impairing the electrode spark or pilot burner. Check that soot or debris is not blocking any of the slots in the main burner. After servicing, make sure that the ceramic walls are replaced and the ceramic fueleffect pieces are replaced correctly as described in the installer and owner guidesupplied with the ceramic fuel effect. The ceramic fuel effect guide may have beenplaced inside or attached to this guide. Always test for gas soundness and spillage after servicing the appliance.16.1 Checking the aeration setting of theburner.1. The aeration shutter is factory set. It isimportant to ensure that the aeration setting iscorrect (See figure 37).2. To adjust the aeration setting loosen the twoaeration shutter screws, slide the aeration shutterto the desired position and tighten the fixingscrews.© Baxi Heating U.K. Limited 2009.Figure 37. Aeration shutter setting