15 Soft Engineer programming via the keypadThis section provides [Soft] Engineer programming options using the LCD keypad.For each menu option, the keypad must be in Engineer programming:1. Enter a valid Engineer PIN. (Default Engineer PIN is 1111. For more details, see Engineer PINs onpage 106.)2. Using the up/down arrow keys, scroll to the desired programming option.3. It is also possible to select a programming option using the keypad digits, enter the Engineerprogramming PIN plus the digit as shown in the table below.If you change one of the programming options, the keypad displays UPDATED momentarily.Number Name Description1 SETTING Performs an Unset, Fullset or Partset on the system.2 INHIBIT Displays a list of the Inhibited zones on the system.3 ISOLATE Allows the engineer to isolate zones on the system. See Isolate onpage 166.4 EVENT LOG Displays a list of the most recent events on the system. SeeEvent Log on page 166.5 ACCESS LOG Displays a list of the most recent access to the system. SeeAccess Log on page 166.6 ALARM LOG Displays a list of recent alarms. See Alarm Log on page 166.7 CHANGEENG PINAllows the engineer to change the Engineer PIN. See ChangeEngineer Pin on page 167.8 USERS Allows the engineer to add, edit or delete users. See Users onpage 135.9 SMS Allows the user to add, edit or delete SMS details for users. SeeSMS on page 167.See alsoTest on page 162Door Control on page 170Engineer programming via the keypad on page 112Installer Text on page 170Set Date/Time on page 169SMS on page 167© Vanderbilt 2018 111 A6V10276959-d11.2018
