Vanderbilt SPC4 Series Installation & Configuration Manual

Contents

Vanderbilt SPC4 Series Installation & Configuration Manual Manual pdf 195 page image

3. The logging of individual zone state changes is enabled by setting the log attribute for that zone inthe Zone Attributes configuration page.In order to avoid multiple events from the same source filling the log, the SPC system, in accordancewith standards, permits the logging of only 3 activations of the same zone in one set period.17.7.2 Access LogThe log provides all the access events of the SPC system.1. Select Log > Access log.The following page will be displayed:2. Create a text file of the log by clicking on the Text File button.17.7.3 ALARM LOGThe ALARM LOG displays a list of alarm events.l Select Log > System Log > Alarm Log.SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser© Vanderbilt 2018 195 A6V10276959-d11.2018

/ 402

Related manuals for Vanderbilt SPC4 Series

Vanderbilt SPC42 Series Installation & Configuration Manual

Vanderbilt CAPA2415-C230 Installation Manual

Vanderbilt SPCP432 Instructions Manual

Vanderbilt SPCP332 Quick Start Manual

Vanderbilt CAPA2415-C230 Quick Start Manual

Vanderbilt PSU241038 Quick Start Manual

manualsdatabase

Your AI-powered manual search engine