Driving and operating 131Interruption of powersupplyThe clutch is not disengaged if thevehicle battery is discharged and agear has been selected. The vehiclecannot move. The selector levercannot be moved out of position P orN.If the battery is discharged, start thevehicle using jump leads 3 184.If the battery is not the cause of thefault, release the selector lever:1. Switch off ignition and remove thekey.2. Depress and hold foot brake.3. Remove trim cover.4. Press and hold shift lock releasebutton.5. Shift to neutral (N).6. Replace trim cover.7. Start engine and shift to chosengear.Have the cause of the power supplyinterruption remedied by a workshop.Manual transmissionReverse: with the vehicle stationary,wait 3 seconds after depressingclutch pedal and engage the gear.If the gear does not engage, set thelever to neutral, release the clutchpedal and depress again; then repeatgear selection.Do not grind the clutch unnecessarily.When operating, depress the clutchpedal completely. Do not use thepedal as a foot rest.
