Storage 69Safety netThe safety net can be mountedbehind the rear seats or, if the rearseat backrests are folded down, infront of the rear seats.Passengers must not be transportedbehind the safety net.InstallationThere are four installation openings inthe roof frame, two located in front ofand two behind the rear seats.When fitting behind the rear seats,remove the load compartment cover3 65.When fitting in front of the rear seats,push head restraints of the rear seatsdown and fold down rear seatbackrests 3 38.Open aperture covers on the roofframe and insert top corners of safetynet into large apertures in roof frameand secure by sliding them into thesmaller apertures.In front of and behind the rear seatson both sides of the vehicle are thehook holders (lashing eyes) for thelower strap hooks. Hang strap hooksin the two lashing eyes. Pull on thestraps to take up any slack.9 WarningDo not stack loads higher than theupper end of the safety net.Avoid applying excessive force tothe safety net or hanging heavyitems from it.Do not place loads behind thesafety net which have sharp edgesthat could pass through the net inthe event of heavy braking, forexample.RemovalLoosen straps by pulling up strapadjusters and remove the strap hooksfrom the lashing eyes. Pull topcorners of safety net from the smallerapertures into the larger aperturesand remove.Warning triangleStow the warning triangle below thefloor cover in the load compartment.
