Vehicle care 1613. Remove bulb from bulb holder bypulling it straight out.4. Insert new bulb, using a lint-freecloth to hold bulb.5. Reinstall bulb holder in lampassembly by rotating it clockwise.6. Reinstall headlamp assembly.Fog lights1. Remove 2 screws from panel onunderside of vehicle below frontfog lights and remove panel.2. Disconnect harness connectorfrom bulb holder and rotate bulbholder anticlockwise.3. Remove bulb holder from lampassembly, rotate bulbanticlockwise and remove frombulb holder.4. Insert new bulb into bulb holderand rotate it clockwise.5. Reinstall bulb holder in lampassembly and reconnect harnessconnector.6. Reinstall panel to underside ofvehicle using 2 screws removedearlier.Tail lightsRear brake, tail, turn signal,reverse and fog tail light1. Open the tailgate and remove2 screws and lamp assembly.2. Remove bulb holder by rotating itanticlockwise.3. Remove bulb from bulb holder bypressing the bulb in and rotating itanticlockwise.4. Insert new bulb into bulb holder.5. Reinstall bulb holder into lampassembly. Rotate bulb holderclockwise and ensure it is secure.
