Vehicle care 153If the cooling system is cold, thecoolant level should be between theMIN and MAX marks. Top up if thelevel is low.9 WarningAllow the engine to cool beforeopening the cap. Carefully openthe cap, relieving the pressureslowly.To top up use a 1:1 mixture ofreleased coolant concentrate mixedwith clean tap water. If no coolantconcentrate is available, use cleantap water. Install the cap tightly. Havethe coolant concentration checkedand have the cause of the coolantloss remedied by a workshop.Engine coolant temperature controlindicator W 3 87.Power steering fluidOpen the cap and remove. Wipe thedipstick dry and turn the cap in thecontainer. Open the cap again andread the power steering fluid level.The power steering fluid level must bebetween the MIN/COLD and theMAX/HOT marks.If the fluid level is too low, seek theassistance of a workshop.Washer fluidFill with clean water mixed with asuitable quantity of washer fluid whichcontains antifreeze. For the correctmixing ratio refer to the washer fluidcontainer.
