Vega VEGABAR 82 Operating Instructions Manual

Also see for VEGABAR 81: Operating instructions Operating instructions Quick setup guide Operating instructions Quick setup guide

Contents

357 Set up with the display and adjustment moduleVEGABAR 82 • Slave sensor for electronic differential pressure48046-EN-1903207 Set up with the display and adjustmentmodule7.1 Parameter adjustmentThe main menu is divided into five sections with the following func-tions:Setup: Settings, e.g., for measurement loop name, application, units,position correction, adjustment, signal outputDisplay: Settings, e.g., for language, measured value display, lightingDiagnosis: Information, e.g. on instrument status, pointer, measure-ment reliability, simulationAdditional adjustments: PIN, date/time, reset, copy functionInfo: Instrument name, hardware and software version, date of manu-facture, sensor featuresIn the main menu item "Setup", the individual submenu items shouldbe selected one after the other and provided with the correct param-eter values.The following submenu points are available:In the following section, the menu items from the menu "Setup" forelectronic differential pressure measurement are described in detail.Depending on the selected application, different sections are relevant.Information:Further menu items of the menu "Setup" as well as the completemenus "Display", "Diagnosis", "Additional adjustments" and "Info"are described in the operating instructions of the respective mastersensor.A parameter change with SIL qualified instruments must always becarried out as follows:• Unlock adjustment• Change parameters• Lock adjustment and verify modified parametersThis ensures that all modified parameters have been deliberatelychanged.Unlock adjustmentThe instrument is shipped in locked condition.Main menuOperating sequence