10 Supplement10.1 Technical dataGeneral dataMaterial 316L corresponds to 1.4404 or 1.4435Materials, wetted parts- Process fitting - thread 316L- Process fitting - flange 316L- Process seal Klingersil C-4400- insulation (partly insulated) PTFE- Electrode (rod partly PTFE insulated:ø 12 mm/0.472 in)316LMaterials, non-wetted parts- Plastic housing plastic PBT (Polyester)- Aluminium die-casting housing Aluminium die-casting AlSi10Mg, powder-coated -basis: Polyester- Stainless steel housing - precision cast-ing316L- Stainless steel housing, electropolished 316L- Seal between housing and housingcoverNBR (stainless steel housing, investment casting),silicone (Aluminium/plastic housing, stainless steelhousing, electro-polished)- Ground terminal 316LProcess fittings- Pipe thread, cylindrical (ISO 228 T1) G½ A, G¾ A, G1 A, G1½ A- American pipe thread, tapered ½ NPT, ¾ NPT, 1 NPT, 1½ NPT- Flanges DIN from DN 25, ANSI from 1"Weight- Instrument weight (depending on proc-ess fitting)0.8 … 4 kg (0.18 … 8.82 lbs)- Rod weight: ø 12 mm (0.472 in) 900 g/m (9.9 oz/ft)Sensor length (L) 0.1 … 6 m (0.328 … 19.69 ft)Max. lateral load 10 Nm (7.4 lbf ft)Max. torque (process fitting - thread) 100 Nm (73 lbf ft)Output variableOutput signal digital output signal, format according to IEEE-754Sensor address 126 (default setting)Current value 10 mA, ±0.5 mADamping (63 % of the input variable) 0 … 999 s, adjustableVEGACAL 62 • Profibus PA 4310 Supplement30025-EN-090603