Vega VEGACAL 62 Operating Instructions Manual

Also see for VEGACAL 62: Safety manual User manual Operating instructions Operating instructions

The capacitance as well as the resistance change are converted bythe electronics module into a level-proportional signal.Power supply via the Profibus DP/PA segment coupler or VEGALOG571 EP cards. A two-wire cable according to Profibus specificationserves as carrier of both power and digital data transmission formultiple sensors. The instrument profile of VEGACAL 62 correspondsto profile specification version 3.0.The GSD (instrument master files) and bitmap files necessary forplanning your Profibus-DP-(PA) communication network are availablefrom the download section on the VEGA homepage www.vega.comunder "Services - Downloads - Software - Profibus". There you canalso find the appropriate certificates. In a PDM environment, an EDD(Electronic Device Description) is also required to enable the full rangeof sensor functions (also available as a download).A CD with theappropriate files can be ordered via e-mail under info@de.vega.com orby phone from one of the VEGA agencies under the order number"DRIVER.S".The backlight of the indicating and adjustment module is powered bythe sensor. Prerequisite is a certain level of operating voltage.The data for power supply are specified in chapter "Technical data".The optional heating requires its own operating voltage. You can finddetails in the supplementary instructions manual "Heating for indicat-ing and adjustment module".This function is generally not available for approved instruments.3.3 OperationVEGACAL 62 can be adjusted with different adjustment media:l with indicating and adjustment modulel with the suitable VEGA DTM in conjunction with an adjustmentsoftware according to the FDT/DTM standard, e.g. PACTware andPCl with the adjustment program PDM3.4 Packaging, transport and storageYour instrument was protected by packaging during transport. Itscapacity to handle normal loads during transport is assured by a testaccording to DIN EN 24180.The packaging of standard instruments consists of environment-friendly, recyclable cardboard. For special versions, PE foam or PE foilis also used. Dispose of the packaging material via specialisedrecycling companies.Power supply and buscommunicationGSD/EDDPackagingVEGACAL 62 • Profibus PA 93 Product description30025-EN-090603