Vega VEGAPULS 61 Operating Instructions Manual

Contents

Vega VEGAPULS 61 Operating Instructions Manual Manual pdf 38 page image

386 Set up with the display and adjustment module PLICSCOMVEGAPULS 61 • Profibus PA28444-EN-141215Function Reset valueMax. adjustment 0 m(d)Min. adjustment Meas. range end in m(d)4)Medium LiquidVessel form not knownDamping 0 sLinearization LinearChannel PV lin. %Sensor-TAG SensorDisplayed value PA-OutExtended settings NoneAdditional PA value Secondary Value 1 %Out-Scale-Unit %PV-Out-Scale 0.00 lin-% = 0.0 %100.0 lin-% = 100 %Unit of measurement m(d)The values of the following menu items are not reset to the resetvalues (see chart) with "Reset":Function Reset valueSensor address No resetLanguage No resetDefault settingLike basic adjustment, but in addition, special parameters are reset todefault values.5)Peak value indicatorThe min. and max. distance values are reset to the actual value.Additional adjustment and diagnosis options such as e.g. scaling,simulation or trend curve presentation are shown in the followingmenu schematic. You will find a detailed description of these menuitems in the operating instructions manual "Display and adjustmentmodule".6.5 Menu schematicInformation:Depending on the version and application, the highlighted menuwindows may not always be available.Optional settings4) Depending on the sensor type, see chapter "Technical data".5) Special parameters are parameters which are set customer-specifically onthe service level with the adjustment software PACTware.