Vega VEGAPULS 61 Operating Instructions Manual

Contents

Vega VEGAPULS 61 Operating Instructions Manual Manual pdf 40 page image

406 Set up with the display and adjustment module PLICSCOMVEGAPULS 61 • Profibus PA28444-EN-141215ServiceBasic adjustment 4DisplayDiagnostics▶ ServiceInfoFalse signal suppression 4.1Change now?Extended setting 4.2None ▼Quick level change ▼Additional PA value 4.3Secondary Value 1Out-Scale-Unit 4.4VolumehlPV-Out-Scale 4.50 % = 0.0 m³100 % = 100 m³Simulation 4.4Start simulation ▼Reset 4.7Select reset?Unit of measurement 4.7m(d) ▼Language 4.8Deutsch ▼Copy sensor data 4.10Copy sensor data?PIN 4.11Enable?InfoBasic adjustment 5DisplayDiagnosticsService▶ InfoInstrument type 5.1Serial number12345678Date of manufacture 5.222. November 2010Software version3.80Last change using PC 5.322. November 2010Sensor characteristics 5.4Display now?6.10 Saving the parameter adjustment dataWe recommended noting the adjusted data, e.g. in this operatinginstructions manual, and archiving them afterwards. They are thusavailable for multiple use or service purposes.If VEGAPULS 61 is equipped with a display and adjustment module,the most important data can be read out of the sensor into the displayand adjustment module. The procedure is described in the operatinginstructions manual "Display and adjustment module" in the menuitem "Copy sensor data". The data remain there permanently even ifthe sensor power supply fails.If it is necessary to exchange the sensor, the display and adjustmentmodule is inserted into the replacement instrument and the data arewritten into the sensor under the menu item "Copy sensor data".