Vega VEGAPULS 61 Operating Instructions Manual

Contents

Vega VEGAPULS 61 Operating Instructions Manual Manual pdf 42 page image

427 Set up with PACTware and other adjustment programsVEGAPULS 61 • Profibus PA28444-EN-141215• VEGACONNECT• Power supply unit or processing system7.2 Parameter adjustment with PACTwareFor parameter adjustment of the instrument via a Windows PC, theconfiguration software PACTware and a suitable instrument driver(DTM) according to FDT standard are required. The latest PACTwareversion as well as all available DTMs are compiled in a DTM Collec-tion. The DTMs can also be integrated into other frame applicationsaccording to FDT standard.Note:To ensure that all instrument functions are supported, you shouldalways use the latest DTM Collection. Furthermore, not all describedfunctions are included in older firmware versions. You can downloadthe latest instrument software from our homepage. A description ofthe update procedure is also available in the Internet.Further setup steps are described in the operating instructions manu-al "DTM Collection/PACTware" attached to each DTM Collection andwhich can also be downloaded from the Internet. Detailed descrip-tions are available in the online help of PACTware and the DTMs.Fig. 36: Example of a DTM viewAll device DTMs are available as a free-of-charge standard versionand as a full version that must be purchased. In the standard version,all functions for complete setup are already included. An assistant forsimple project configuration simplifies the adjustment considerably.Saving/printing the project as well as import/export functions are alsopart of the standard version.In the full version there is also an extended print function for completeproject documentation as well as a save function for measured valuePrerequisitesStandard/Full version