Vega VEGAPULS 62 standpipeversion Operating Instructions Manual
                                                                            | |
Contents
| 
6 Set up with the indicating and adjustmentmodule6.1 Insert indicating and adjustment moduleThe indicating and adjustment module can be inserted into the sensorand removed any time. Four positions displaced by 90° can beselected. It is not necessary to interrupt the power supply.Proceed as follows:1 Unscrew the housing cover2 Place the indicating and adjustment module in the requestedposition onto the electronics and turn to the right until it snaps in3 Screw housing cover with inspection window tightly back onRemoval is carried out in reverse order.The indicating and adjustment module is powered by the sensor, anadditional connection is not necessary.Fig. 11: Insertion of the indicating and adjustment module with single chamberhousing into the electronics compartment20 VEGAPULS 62 standpipe version • Foundation Fieldbus6 Set up with the indicating and adjustment module36510-EN-120301 |
Related manuals for Vega VEGAPULS 62 standpipeversion
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine