Vega VEGAPULS 62 standpipeversion Operating Instructions Manual
                                                                            | |
Contents
| 
The following table shows the default values of VEGAPULS 62:Menu section Menu item Default valueSetup Measurementloop nameSensorMin. adjustment Length of the standpipe Ex factoryDamping 0.0 sDisplay Language Like orderDisplayed value DistanceDisplay unit m(d)Scaling 0.00 %, 0 l100.00 %, 100 lFurther settings Distance unit mTemperature unit °CUnit SV2 mProbe length Length of the standpipe Ex factoryLinearisation cur-veLinear6.4 Saving the parameter adjustment dataIt is recommended noting the adjusted data, e.g. in this operatinginstructions manual and archive them afterwards. They are henceavailable for multiple use or service purposes.If the instrument is equipped with an indicating and adjustmentmodule, the data in the sensor can be saved in the indicating andadjustment module. The procedure is described in the operatinginstructions manual "Indicating and adjustment module" in the menuitem "Copy sensor data". The data remain there permanently even ifthe sensor power supply fails.The following data or settings for adjustment of the indicating andadjustment module are saved:l All data of the menu "Setup" and "Display"l In the menu "Additional settings" the items "Sensor-specific units,temperature unit and linearization"l The values of the user programmable linearization curveThe function can also be used to transfer settings from one instrumentto another instrument of the same type. If it is necessary to exchange asensor, the indicating and adjustment module is inserted into thereplacement instrument and the data are likewise written into thesensor via the menu item "Copy sensor data".30 VEGAPULS 62 standpipe version • Foundation Fieldbus6 Set up with the indicating and adjustment module36510-EN-120301 |
Related manuals for Vega VEGAPULS 62 standpipeversion
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine