Vega VEGAPULS 62 standpipeversion Operating Instructions Manual
                                                                            | |
Contents
| 
7 Setup with PACTware7.1 Connect the PC312Fig. 14: Connection of the PC directly to the sensor via the interface adapter1 USB cable to the PC2 Interface adapter VEGACONNECT 43 SensorInformation:The interface adapter VEGACONNECT 3 or additional previousversions are not suitable for connection to the sensor.7.2 Parameter adjustment with PACTwareFor parameter adjustment of the sensor via a Windows PC, theconfiguration software PACTware and a suitable instrument driver(DTM) according to FDT standard are required. The up-to-datePACTware version as well as all available DTMs are compiled in aDTM Collection. The DTMs can also be integrated into other frameapplications according to FDT standard.Note:To ensure that all instrument functions are supported, you shouldalways use the latest DTM Collection. Furthermore, not all describedfunctions are included in older firmware versions. You can downloadthe latest instrument software from our homepage. A description of theupdate procedure is also available in the Internet.Via the interface adapterdirectly on the sensorPrerequisites32 VEGAPULS 62 standpipe version • Foundation Fieldbus7 Setup with PACTware36510-EN-120301 |
Related manuals for Vega VEGAPULS 62 standpipeversion
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine