Vega VEGAPULS 69 Operating Instructions Manual

Also see for VEGAPULS 69: Operating instructions Mounting instructions Product information Quick setup guide Operating instructions

Contents

526 Set up with the display and adjustment moduleVEGAPULS 69 • Foundation Fieldbus47251-EN-160815In this menu item, the FF Device ID of the instrument will be dis-played:In this menu item, the features of the sensor such as approval, pro-cess fitting, seal, measuring range, electronics, housing and othersare displayed.6.6 Saving the parameter adjustment dataWe recommended noting the adjusted data, e.g. in this operatinginstructions manual, and archiving them afterwards. They are thusavailable for multiple use or service purposes.If the instrument is equipped with a display and adjustment module,the data in the sensor can be saved in the display and adjustmentmodule. The procedure is described in the menu "Additional adjust-ments" in the menu item "Copy device settings". The data remainthere permanently even if the sensor power supply fails.The following data or settings for adjustment of the display and ad-justment module are saved:• All data of the menu "Setup" and "Display"• In the menu "Additional settings" the items "Sensor-specific units,temperature unit and linearization"• The values of the user programmable linearization curveThe function can also be used to transfer settings from one instru-ment to another instrument of the same type. If it is necessary toexchange a sensor, the display and adjustment module is insertedinto the replacement instrument and the data are likewise written intothe sensor via the menu item "Copy device settings".Info - Device IDInfo - Sensor character-isticsBackup on paperBackup in the display andadjustment module