Vega VEGAPULS 69 Operating Instructions Manual

Also see for VEGAPULS 69: Operating instructions Mounting instructions Product information Quick setup guide Operating instructions

Contents

649 Diagnosis, asset management and serviceVEGAPULS 69 • Foundation Fieldbus47251-EN-160815The new electronics module must be loaded with the default settingsof the sensor. These are the options:• In the factory• Or on site by the userIn both cases, the serial number of the sensor is needed. The serialnumbers are stated on the type label of the instrument, on the insideof the housing as well as on the delivery note.When loading on site, first of all the order data must be downloadedfrom the Internet (see operating instructions manual "Electronicsmodule").Caution:All user-specific settings must be entered again. Hence, you have tocarry out a new setup after the electronics exchange.If you have stored the data of the parameter adjustment during thefirst setup of the sensor, you can transfer these to the replacementelectronics module. A new setup is no more necessary.9.6 Software updateThe following components are required to update the instrumentsoftware:• Instrument• Voltage supply• Interface adapter VEGACONNECT• PC with PACTware• Current instrument software as fileYou can find the current instrument software as well as detailedinformation on the procedure in the download area of our homepage:www.vega.com.Caution:Instruments with approvals can be bound to certain software versions.Therefore make sure that the approval is still effective after a softwareupdate is carried out.You can find detailed information in the download area atwww.vega.com.9.7 How to proceed if a repair is necessaryYou can find an instrument return form as well as detailed informa-tion about the procedure in the download area of our homepage:www.vega.com.By doing this you help us carry out the repair quickly and without hav-ing to call back for needed information.If a repair is necessary, please proceed as follows:• Print and fill out one form per instrument• Clean the instrument and pack it damage-proof• Attach the completed form and, if need be, also a safety datasheet outside on the packaging