Vega VEGAPULS 69 Operating Instructions Manual

Also see for VEGAPULS 69: Operating instructions Mounting instructions Product information Quick setup guide Operating instructions

Contents

6711 SupplementVEGAPULS 69 • Foundation Fieldbus47251-EN-16081511 Supplement11.1 Technical dataNote for approved instrumentsThe technical data in the respective safety instructions are valid for approved instruments (e.g. withEx approval). These data can differ from the data listed herein, for example regarding the processconditions or the voltage supply.TorquesMax. torques, threaded versionƲ G¾ 30 Nm (22.13 lbf ft)Ʋ G1½ 200 Nm (147.5 lbf ft)Max. torques, version plastic horn antennaƲ Mounting screws, mounting strap onsensor housing4 Nm (2.950 lbf ft)Ʋ Flange screws, compression flangeDN 805 Nm (3.689 lbf ft)Ʋ Flange screws, adapter flange DN 100 7 Nm (5.163 lbf ft)Max. torques, version metal-jacketed lens antennaƲ Terminal screws for swivelling holder 8 Nm (5.9 lbf ft)Max. torques for NPT cable glands and Conduit tubesƲ Plastic housing 10 Nm (7.376 lbf ft)Ʋ Aluminium/Stainless steel housing 50 Nm (36.88 lbf ft)Materials and weights316L corresponds to 1.4404 or 1.4435Materials, wetted parts with metal-jacketed lens antennaƲ Process fitting 316L, Alloy C22 (2.4602), Alloy 400 (2.4360)Ʋ Process seal On siteƲ Antenna PP, PEEKƲ seal, antenna system FKM (SHS FPM 70C3 GLT), EPDM (COG AP310)Materials, wetted parts with plastic horn antennaƲ Adapter flange PP-GF30 blackƲ Seal, adapter flange FKM (COG VI500), EPDM (COG AP310)Ʋ Antenna cone PBT-GF 30Ʋ Focussing lense PPMaterial, wetted parts rinsing air connectionƲ Rinsing air connection PP-GFKƲ Seal FKM (COG VI500), EPDM (COG AP310)Materials, non-wetted partsƲ Compression flange PP-GF30 blackƲ Mounting strap 316L