164 CineCast Quad Pro Version 2.6 Installation and User ManualIn addition, the primary and secondary audio sources may be set to stereo, left, orright-only by clicking the desired radio buttons.Click OK to save current (or changed) settings and dismiss the window. ClickCancel to dismiss the window without saving any changes that may have beenentered. Click Apply to save the changes without dismissing the window.Dynamic Settings Window: Inline(Figure 3-18) Dynamic Settings shown with the Inline checkbox enabled. Thewindow expands to display the following items:Triggered Events – Allows commands to remain pending until the specificevent occurs, as defined in Time Code. The desired inline event can be selected inthe drop-down list box.Time Code (Immediate) – When this radio button is checked, the pendingcommand is executed immediately by clicking the Apply button.Time Code (Output) – The desired inline command will remain pending until aspecific output time code (either MPEG GOP time code or extracted VITC timecode) is reached. A time code display will appear if this button is checked. SeeFigure 3-19.Time Code (Input) – The desired inline command will remain pending until aspecific Input LTC time code occurs. A time code display will appear if this but-ton is checked. See Figure 3-20.Time Code (Frames) – Command will remain pending until a specific framecount, entered in the text box, is reached. See Figure 3-21.Click OK to activate the pending command and dismiss the window. Click Cancelto dismiss the window with no action. Click Apply to activate the pendingcommand without dismissing the window.IBM Decoder AudioCrystal Audio output #1Crystal Audio output #2Adjacent channel IBM Decoder AudioAdjacent channel Crystal Audiooutput #1Adjacent channel Crystal Audiooutput #2