44 CineCast Quad Pro Version 2.6 Installation and User ManualCustomer SupportCustomer SupportIn the event of problems with your CineCast Quad Pro decoder, do not hesitate tocontact Vela Training and Support using the following methods:• Phone: (727) 507-5301• E-mail: support@vela.com• World Wide Web — http://www.vela.comD-Sub Connector J7 (Bottom), “SMU Out”Pin SignalPin 1 LTC IN (+)Pin 2 GNDPin 3 CTRL PNL RS-485B (Reserved)Pin 4 SMU RS-485A TERMINATION (Reserved)Pin 5 SMU RS-485B TERMINATION (Reserved)Pin 6 GNDPin 7 PWRUP_NTSC DISCRETE INPUTPin 8 CTRL PNL RA-485A (Reserved)Pin 9 GNDPin 10 SMU RS-485B (Reserved)Pin 11 LTC IN (–)Pin 12 CTRL PNL RS-485A TERMINATION (Reserved)Pin 13 CTRL PNL RS-485B TERMINATION (Reserved)Pin 14 SMU RS-485A (Reserved)Pin 15 GNDNote 1: Terminate Control Panel RS-485 bus by jumping pin 8 to 12 and pin 3to 13 in the cable.Note 2: Terminate SMU RS-485 bus by jumping pin 4 to 14 and pin 5 to 10 inthe cable.Table 1-9. Connector J7, Bottom
