14920. Machine safety cabin (optional)20.1 Setting up the machine safety cabinWhen mounting the machine safety cabin to a WABECO machine base cabinet, the appropriate boredholes are already present. The machine base cabinet ensures a safe base for the milling machine ormachine safety cabin.If the machine safety cabin is secured to another suitable surface, the 4 through holes must be boredinto the surface by the client. For the positions of the 4 fixture threaded sockets (thread M8) of the ma-chine safety cabin, see diagram. The diameter of the through holes in the surface must be at least 9 mm.20.2 Mounting of the machine safety cabin to the machine base cabinet(optional)■ The machine safety cabin (2) is positioned, as shown, on the machine base cabinet (1).■ The screws and washers required for assembly are included in the scope of delivery.To screw the machine safety cabin to the machine base cabinetproceed as follows:1. Combine each screw with a washer.2. Open the door or the machine base cabinet.3. Push the screws from below, through the bored holes in the machine base cabinet, into the fixturethreaded sockets and tighten using a Allen key of size 6.2 7 5267,515007 0 096 51 1 5
