6116. Control elements16.2 Milling machines F1200 hs - F1210 hs (2.0 kW)1. Potentiometer rotating knob for speed selection of the electrical drive motor2. 3-setting switch of the electrical drive motor (START RIGHT - STOP - START LEFT)3. Emergency off switch4. Tool tightening screw5. Hand wheel for setting the boring and milling depth6. Clamping lever for securing the boring and milling depth7. Hand wheel for adjusting the longitudinal motion (X-axis) of the cross slide support8. Clamping lever for securing the transverse motion (Y-axis) at the cross slide support9. Hand wheel for adjusting the transverse motion (Y-axis) of the cross slide support10. Clamping lever for securing the protective hood11. Clamping lever for securing the tool spindle12. Activation lever for moving the tool spindle (sleeve stroke)13. Clamping lever for securing the longitudinal motion (X-axis) at the cross slide support14. Hexagonal nut for swiveling the milling head15. Index bolt for securing the milling head16. Depth stop for boring15614810131112169 75123 4
