6216. Control elements16.3 Milling machines F1200-C – F1210-C (1.4 kW)1. ON/OFF switch with under-voltage trigger2. Emergency off switch3. Potentiometer rotating knob for speed selection of the electrical drive motor4. Hand wheel for setting the boring and milling depth5. Clamping lever for securing the boring and milling depth6. Hand wheel for adjusting the longitudinal motion (X-axis) of the cross slide support7. Clamping lever for securing the transverse motion (Y-axis) at the cross slide support8. Hand wheel for adjusting the transverse motion (Y-axis) of the cross slide support9. Tool tightening screw10. Clamping lever for securing the protective hood11. Clamping lever for securing the tool spindle12. Activation lever for moving the tool spindle (sleeve stroke)13. Clamping lever for securing the longitudinal motion (X-axis) at the cross slide support14. Hexagonal nut for swiveling the milling head15. Index bolt for securing the milling head16. Depth stop for boring964816155147101112131 2 3
