WAGNER GM 4700AC Original Operating Manual

Also see for GM 4700AC: Operating manual Translation of the original operating manual

Contents

WAGNER GM 4700AC Original Operating Manual Manual pdf 21 page image

216.4.3 AIR SUPPLY LINESEnsure that only dry, clean atomizing air is used in the spray gun! Dirt and moisture in theatomizing air worsens the spraying quality and spray pattern.WARNINGHose connections!Risk of injury and damage to the device.Do not mix up hose connections of product hose and air hose.6.4.4 PRODUCT SUPPLY LINESNOTICEImpurities in the spraying system!Spray gun blockage, products harden in the spraying system.Flush the spray gun and paint supply with a suitable flushing agent.DANGERBursting hose, bursting threaded joints!Danger to life from injection of product.Ensure that the hose material is chemically resistant to the sprayed products.Ensure that the spray gun, fittings and product hose between the device and thespray gun are suitable for the pressure generated in the device.Ensure that the following information can be seen on the high-pressure hose:- manufacturer,- permissible operating pressure,- date of manufacture.6.5 GROUNDINGWARNINGHeavy paint mist if grounding is insufficient!Danger of poisoning.Insufficient paint application quality.Ground all device components.Ground the work pieces to be coated.A conductive connection (potential equalization cable) must be established betweenoriginal tank and the equipment.6.6 SAFETY CHECKSCarry out safety checks in accordance with Chapter 8.2.3.6.7 LACQUER PREPARATIONSThe viscosity of the lacquer is of great importance. The best spraying results are obtainedwith values between 80 and 260 millipascals (mPas) × sec.Please also read the technical data sheet of the lacquer for optimal processing, viscosityadjustment and intermixing of the product.VERSION 06/2018 ORDER NUMBER DOC2311730