WAGNER GM 4700AC Original Operating Manual

Also see for GM 4700AC: Operating manual Translation of the original operating manual

Contents

WAGNER GM 4700AC Original Operating Manual Manual pdf 45 page image

4513.5 AIRCOAT PRE-ATOMIZER NOZZLES AC3000 PLUS20° 30° 40° 50° 60°08 208 308 408 508200200 0,008 (0,20) 0,22 (0,058)10 210 310 410 510 6101500,010 (0,25) 0,32 (0,084)12 212 312 412 512 6121001000,012 (0,30) 0,44 (0,116)14 214 314 414 514 614 0,014 (0,36) 0,60 (0,159)16 216 316 416 516 616 0,016 (0,41) 0,76 (0,201)18 218 318 418 518 61860500,018 (0,46) 0,92 (0,244)20 320 420 620 0,020 (0,51) 0,11 (0,030)22 422 622 0,022 (0,56) 0,14 (0,036)100(3,94)145(5,71)195(7,68)250(9,84)300(11,81)B_05736Article No. 321xxx In order to determine the article number of a nozzle, please select thenumber from the table and replace the three xxx.Example: nozzle 410 -> article number 321410Spray angle Product filter (in mesh)Edge filter Gun filterDrilled hole Product flow*Spray pattern width mm (inch)**Sizeinch (mm) l/min (gal/min)* Tested with water and 100 bar pressure.** Tested with 110 bar (1595 psi), 30 cm (11.81 inches) distance and lacquer 56DIN-4s.13.6 PUSH-IN FILTEROrder no. Filter sizes Mesh Use for nozzles2315723 Push-in filter, red (10 pieces) 200 0.007" - 0.011"B_023932315724 Push-in filter, blue (10 pieces) 150 0.011" - 0.013"2315725 Push-in filter, yellow (10 pieces) 100 0.013" - 0.019"2315726 Push-in filter, white (10 pieces) 50 0.019" - 0.023"2315729 Push-in filter, green (10 pieces) 30 0.019" - 0.023"VERSION 06/2018 ORDER NUMBER DOC2311730