WAGNER GM 5000EA Operating Manual

Also see for GM 5000EA: Operating manual Translation of the original operating manual

Contents

29GM 5000EAB_00180OPERATING MANUALEDITION 04/2016 ORDER NUMBER DOC23444995.5.2 SPRAYING PROCEDURE FOR FLAT JET AIR ATOMIZINGShaping airAir cap Spray patternAtomizing airAdvantages- Large range of adjustment of the spray jet- Thin layers- Uniform coating thickness- Perfect finishSpray product Spray angleIn this process, the spray product is fed to the nozzle at a pressure of 0.05–0.2 MPa; 0.5–2 bar; 7–29 psi. Theatomizing air at approx. 0.25 - 0.4 MPa; 2.5 - 4 bar; 36 - 58 psi produces a soft round jet, which largely eliminatesthe problem of overlapping boundaries. The shaping air allows modification of the spray jet. There are variousnozzles and air caps available as accessories for the respective spray product and the discharge quantities.