44GM 5000EAOPERATING MANUALEDITION 04/2016 ORDER NUMBER DOC23444997 OPERATION7.1 TRAINING THE OPERATING STAFF7.2 SAFETY INSTRUCTIONSIncorrect operation!Risk of injury and damage to the device.If contact with lacquers or cleaning agents causes skin irritation,appropriate precautionary measures must be taken, e.g.,wearing protective clothing.The footwear worn by operating staff must comply withEN ISO 20344. The measured insulation resistance must notexceed 100 megohms.The protective clothing, including gloves, must comply withEN ISO 1149-5. The measured insulation resistance must notexceed 100 megohms.WARNINGObserve safety instructions in Chapter 4.Incorrect operation!Risk of injury and damage to the device.The operating staff must be qualified to operate the entiresystem.The operating staff must be familiar with the potential risksassociated with improper behavior as well as the necessaryprotective devices and measures.Before work commences, the operating staff must receiveappropriate system training.WARNINGUnintentional putting into operation!Risk of injuryBefore any work on the device, in the event of work interruptionsand malfunctions:Switch off the energy/compressed air supply.Relieve the pressure from the spray gun and unit.Secure the spray gun against actuation.In the event of functional faults: remedy the fault as described inthe "Troubleshooting" chapter.WARNING
