69B_00019B_03221MFOPERATING MANUALEDITION 07/2014 ORDER NUMBER DOC 234450012.3 FILTEROrder No. Designation3204604 Edge filter 60 mesh (white)3204605 Edge filter 100 mesh (black)9999002 Edge filter 200 mesh (yellow)12.4 REDUCTION FITTINGS FOR HIGH-PRESSURE HOSESThe classification of WAGNER fittings is consistent with the following classification, eachseparated by high-pressure and low pressure fittings:Double fitting - male / male threadReduction fitting - female / male threadAdjustable screw - female / male thread: allows precise angle adjustment (swivel)90° elbow - adjustable or male / male thread (elbow fitting)Bulkhead fastener - male / male thread with pressure-resistant feed-throughStopper - male thread for closing (plug fitting)Hose fi tting with union nut and sealing cone (hose fitting)The short description of the fittings are as follows:Materials, SSt = Stainless steelNominal pressure (in bar)1st thread, e.g. G1/4", 1/4"NPS2nd thread, e.g. G1/4", 1/4"NPS, M16x1.5M: male (outer thread) F: female (interior thread)Short description see table above, e.g. RF = Reduction FittingOrder No. Designation384555 Reduction fitting-RF-FM-M16x1,5-1/4"NPS-PN530-SSt384559 Reduction fitting RF-FM-M16x1,5-G1/4"-PN530-SSt384556 Reduction fitting RF-FM-M16x1,5-3/8"NPSM-PN530-SSt34041 Reduction fitting RF-FM-1/4"NPS-M16x1,5--PN270-SSt179732 Reduction fitting RF-FM-1/4"NPS-3/8"NPS--PN270-SSt179247 Reduction fitting RF-FM-1/4"NPS-G1/4"--PN270-SStIn the large Wagner Accessories Catalogue for wet coating you will also find other materialfittings.