8OPERATING MANUALEDITION 07/2014 ORDER NUMBER DOC 23445002 CORRECT USE2.1 DEVICE TYPEElectrostatic manual spray gun for manual coating of grounded work pieces2.2 CORRECT USEThe GM 5000EAC electrostatic hand spray gun is suitable for spraying liquid products,particularly coating products, using the AirCoat method. Coating products containingsolvents of explosion class II A may be used.2.4 SAFETY PARAMETERSThe GM 5000EAC electrostatic manual spray gun is only suitable for spraying liquidproducts, particularly coating products.J. Wagner AG forbids any other use!The electrostatic manual spray gun may only be operated under the following conditions:the operating staff have previously been trained on the basis of this operating manual,the safety regulations listed in this operating manual are observed,the operating, maintenance and repair information in this operating manual isobserved,and the statutory requirements and accident prevention regulations standards in thecountry of use are observed.The electrostatic manual spray gun may only be operated if all parameters are set and allmeasurements/safety checks are carried out correctly.2.3 USE IN AN EXPLOSION HAZARD AREAThe GM 5000EAC electrostatic manual spray gun is suitable for coating electricallyconductive objects with liquid coating products and can be used in potentially explosiveareas. (See Chapter 3 "Identification".)
