13GM 5000EAC.OPERATING MANUALEDITION 03/2012 PART NUMBER DOC 23191503 GUARANTEE AND CONFORMITY DECLARATIONS3.1 IMPORTANT NOTES ON PRODUCT LIABILITY3.2 GUARANTEE CLAIMAs a result of an EC regulation, effective as from January 1, 1990, the manufacturer shallonly be liable for his product if all parts come from him or are approved by him, and if thedevices are properly fitted , operated and maintained.If other makes of accessory and spare parts are used, the manufacturer‘s liability could befully or partially null and void.The usage of original WAGNER accessories and spare parts guarantees that all safetyregulations are observed.Full guarantee is provided for this device:We will at our discretion repair or replace free of charge all parts which within 24 monthsin single-shift, 12 months in 2-shift or 6 months in 3-shift operation from date of receipt bythe Purchaser are found to be wholly or substantially unusable due to causes prior to thesale, in particular faulty design, defective materials or poor workmanship.The type of guarantee provided is such that the device or individual components of thedevice are either replaced or repaired as we think fit. The resulting costs, in particularshipping charges, road tolls, labour and material costs will be borne by us except wherethese costs are increased due to the subsequent shipment of the unit to a location otherthan the address of the purchaser.We do not provide guarantee for damage that has been caused or contributed to for thefollowing reasons:Unsuitable or improper use, faulty installation or commissioning by the purchaser or athird party, normal wear, negligent handling, defective maintenance, unsuitable coatingproducts, substitute materials and the action of chemical, electro chemical or electricalagents, except when the damage is attributable to us.Abrasive coating products such as red lead, emulsions, glazes, liquid abrasives, zinc dustpaints and similar reduce the service life of valves, packings, spray guns, tips, cylinders,pistons etc. Signs of wear and tear due to such causes are not covered by this guarantee.Components that have not been manufactured by WAGNER are subject to the originalguarantee of the manufacturer.Replacement of a component does not extend the period of guarantee of the device.The unit should be inspected immediately upon receipt. To avoid losing the guarantee, weor the supplier company are to be informed in writing about obvious faults within 14 daysupon receipt of the device.We reserve the right to have the guarantee compliance met by a contracting company.The services provided by this guarantee depend on evidence being provided in the formof an invoice or delivery note. If an examination discovers that no guarantee claim exists,the costs of repairs are charged to the purchaser.It is clearly stipulated that this guarantee claim does not represent any constraint to statutoryregulations or regulations agreed contractually in our general terms and conditions.J. Wagner AG