31PEM-X1P_01669OPERATING MANUALVERSION 03/2014 ORDER NUMBER DOC 23260207.5 ADJUSTMENT OF POWDER QUANTITYLED display greenReduce powder quantityIncrease powder quantityLED display Operation modeFlashing Normal operation of gunConstant blinking Activated program has been changed using the "+" or"-" button.By selecting another program the modified values ofthe powder quantity are not taken over, however, thecurrent values of the other program are taken overand the blinking changes to flashing.By saving these settings the current values of thepowder feed are taken over in the current program.The blinking changes back to flashing.By activating the "Double Click" function the blinkingis switched off as well, the preset program values arethen active again.Permanent lighting Trigger has been actuated with "Double Click", i.e., the"Double Click" program is activated.Note:This function can only be activated in combination with the EPG-Sprint X control unit.By pressing the buttons "+/-" the preset program values of the feed air (powder quantity)can be changed in the desired direction.In this case the total air remains unchanged, the feed and dosing air is readjust accordingly.
