WAGNER PEM-X1 Operating Manual

Also see for PEM-X1: Original operating manual Translation of the original operating manual

Contents

8PEM-X1OPERATING MANUALVERSION 03/2014 ORDER NUMBER DOC 23260202 CORRECT USE2.1 DEVICE TYPEPowder spray guns for manual coating of grounded work pieces2.2 TYPE OF USEThe PEM-X1 manual powder spray gun is designed for the electrostatic coating of workpieces with organic powders. Any other form of use is considered non-intended use.Wagner disclaims liability for any damage resulting from non-intended use.Electrostatic manual coating systems may only be used in spray areas equipped inaccordance with EN 12981 or under equivalent ventilation conditions.2.3 USE IN POTENTIALLY EXPLOSIVE AREASIn explosion hazard areas, only use approved explosion-proof electrical devices.This type A-P electrostatic powder spray gun is suitable for processing industrial powderpaints for coating electrically conductive objects and can be used in potentially explosiveareas (zone 22). (See Chapter 3.1 Explosion Protection Identification).