WAGNER PEM-X1 Original Operating Manual

Also see for PEM-X1: Operating manual Translation of the original operating manual

Contents

8PEM-X1OPERATING MANUALVERSION 09/2012 ORDER NUMBER DOC 23260202 CORRECT USE2.1 DEVICE TYPEPowder spray guns for manual coating of grounded work pieces2.2 CORRECT USEThe PEM-X1 manual powder spray gun is designed for the electrostatic coating of workpieces with organic powders. Any other form of use is considered not intended use.Wagner disclaims liability for any damage resulting from not intended use.The spray gun may only be used in spray areas equipped in accordance with EN 50177 orunder equivalent ventilation conditions.2.3 FOR USE IN POTENTIALLY EXPLOSIVE AREASThis type A-P electrostatic powder spray gun is suitable for processing industrial powderpaints for coating electrically conductive objects and can be used in potentially explosiveatmospheres (zone 22). (See chapter 3.1 "Explosion Protection Identification").2.4 SAFETY PARAMETERSThe powder hand gun is only suited to the application of powder paint.J. Wagner AG forbids any other use!The powder spray gun may only be operated under the following conditions if:the operating staff have previously been trained on the basis of this operating manual,the safety regulations listed in this operating manual are observed,the operating, maintenance and repair information in this operating manual isobserved,the statutory requirements and accident prevention regulations standard in thecountry of use are observed.The manual powder spray gun may only be operated if all parameters are set and allmeasurements/safety checks are carried out correctly.