WAGO WAGO-I/O-SYSTEM 750 Manual
Also see for I/O-SYSTEM 750: ManualManualTechnical descriptionUser's installation and configurationManual
                                                                | |
Contents
| 
750-636 [DC Drive Controller] • 47Configuration of the I/O Module via the Parameter ChannelWAGO-I/O-SYSTEM 750I/O-Modules2.1.1.10.2.6 PresetValueParameteraddress Function Access Factory setting5 PresetValue (HighWord) R/W 0x00006 PresetValue (LowWord) R/W 0x0000If the terminal detects the preset condition at the digital preset input during a preset motion,the positioning interface will initialize the actual position with the preset value. The formatof this value corresponds to a 32-bit wide integer value (with sign) ranging from:-2147483648 (0x80000000) to +2147483647 (0x7FFFFFFF).0x00000000*...0xFFFFFFFFValue range PresetValue* factory setting2.1.1.10.2.7 OvertravelParameteraddress Function Access Factory setting7 Overtravel R/W 0x0000The overtravel value (counter increments) determines the distance needed for gearboxclearance compensation and differentiates the travel direction toward the setpoint positionduring a positioning operation by its sign.The format of the value is a 16-bit wide signed integer in the value range of: -32768(0x8000) to +32767 (0x7FFF).Overtravel position is setpoint position + overtravel.- Overtravel positive: overtravel position is overtravelled from larger actual values.- Overtravel negative: overtravel position is overtravelled from smaller actual values.0:* Move without overtravel-32768 ... -1: Setpoint position is always approached from below+1 ... +32767: Setpoint position is always approached from above* factory setting |
Related manuals for WAGO I/O-SYSTEM 750
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine