5-36 BA 1001/1501/2001 us – Edition 3.3 * * 12001b540.fmMaintenance5.15 Maintenance plan 1001 – 1501 (overview)Work descriptionFor servicing and maintenance on the attachment, please refer to the operation and maintenance manual of the attachmentmanufacturer as well.Maintenance plan/operating hours (o/h)Maintenance(once a day)Every 50 o/hEvery 500 o/hEvery 1000 o/honce a yearCustomerWacker Neusonservice centerFluid and filter changes ( ):Perform the following oil and filter changes (check oil levels after test run):• Engine oil1 ● ● ●• Engine oil filter 2 ● ● ●• Fuel filter 3 ● ● ●• Air filter element if dirt indicator is at “Service” ●• Coolant ● ●• Hydraulic oil filter insert 4 ● ● ●• Hydraulic oil 5 ● ● ●Inspection work ( ):Check the following material. Refill if necessary:• Engine oil ● ●• Engine coolant ● ●• Hydraulic oil ● ●Clean water ducts 6 ● ●Check radiator for engine and hydraulic oil for dirt. Clean if necessary ● ●Check cooling systems, heating and hoses for leaks and pressure (visual check) ● ●Air filter (damage) ● ●Prefilter with water separator: drain water ● ●• Clean ● ●Check V-belt condition and tension ● ●Replace the V-belt ● ●Check the exhaust system for damage and condition ● ●Check valve clearance. Adjust if necessary ● ●Maintenance
